Guides, comparisons, regulations and tools for specifying the right container.
Which material to choose on permeation, durability, cost and emissions compliance.
ComparisonWhen weight decides: payload, toughness, corrosion and cost.
ComparisonMatch the container format to volume and how the liquid is used.
Read a UN 3A1 or 3H1 marking, and know what to request from a supplier.
RegulationsWhat a fuel can must meet to sell in the US and California.
RegulationsHazard classes, packing groups and the ADR, IMDG and IATA rules.
RegulationsFDA, EU, WRAS and NSF: what a water or food container must document.
Why the pattern still sets the shape, and why holders are interchangeable.
ReferenceMatch galvanized steel, stainless, HDPE and aluminium to your exact liquid.
ReferenceThe molybdenum difference, and when to pay for 316.
ReferenceGrades, blow moulding, and what fluorination does for fuel and solvents.
ReferenceWhy diesel exhaust fluid needs a dedicated container.
ReferenceHow a steel can is protected from rust, and what each finish trades off.
Shelf life, ethanol, stabilisers, the right container and quantity limits.
PlanningHow much water to store per person, and the container that keeps it safe.
LogisticsHow cans are packed, palletised, container-loaded and stored.
SafetySecondary containment for stored fuel and chemicals, and how to size it.
MaintenanceHow to return a can to service safely, and when to retire it.
Why salt air changes the material, and what survives a pontoon.
ApplicationCarrying and storing diesel on a farm, and the container for the field.
ApplicationEnough water and fuel for the distance, in cans that mount to the vehicle.
Six steps from the liquid you carry to the exact specification.
ManufacturingMarking, colour, tooling and minimums for an own-brand run.
ProcurementBuying to a fixed specification, with documentation and reorder cycles.
GuideWhat each size from 3 to 30 litres is for, and why filled weight matters.
We supply these against a specific design and order rather than as generic downloads, so the figures match the drawing you receive. Ask for any of them with your enquiry.
Dimensions, weight, material and closure for the exact design, off the current production drawing.
The UN 3A1 or 3H1 certificate, the test report behind it and the stamped marking for the design.
Send the exact liquid, concentration and temperature and we confirm the material and closure.
Mill certificate or food-contact declaration for stainless and food-grade lines.
Marking, colour, tooling and minimum quantities for an own-brand run.
The current range in one document, prepared for your market and language.
We come back with the right container, its documentation and a quotation at your volume.